0
What problem occurs when a generator is run at 50 percent load?
Wiki User
∙ 11y ago
After given 50% load that time engine was start to hunting
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How to compute the minimum load of 16 MW generator?
A generator, rated at 16 MW, should be able to continuously supply a load of 16 MW. You don't need to compute its 'minimum load', because the minimum load will be zero watts! In other words, you can run the generator with no load whatsoever if you wish to waste fuel.The point is that the power supplied by a generator is determined by the load, NOT by the generator itself -so it is important that the generator is capable of supplying the maximum load applied to it. A generator's 'rated power output' simply tells us the maximum load it is capable of supplying.
What is the basis of a generator load?
The load on a generator is a general word for whatever device is connected to it to use the power that is being generated.
Why electric generator drop the load?
Too much load for the generator, the generator began to under speed / overspeed, the governor / part of the generator went into failure, the generator capability was not up to the requirements placed by the system (needing to push out/pull in too many VARs), etc. there are many reasons for a generator to drop a load. Because a load dropped, this does not infer that the generator was the cause either (fault on the system, system instability limits reached, system protection tripped - non-generator related protection).
What could be the cause of overspeed in a diesel generator?
The causes of over loading in generator comes from the action of applying more load that the generator is rated for. An example using a 5000 watt generator and a connected load of 6000 watts.
When using a resistive load bank to test a generator do you load it to the kW or the kVA?
When using a resistive load bank to test a generator, it does not matter if you load the generator to its kW or kVA rating, because those two numbers are the same when considering a resistive load. Power factor, which is the difference between true and apparent power, only comes into play when there is a reactive (inductive or capacitative) load.
What is the load rejection and load pick-up in the power generation?
Load rejection occurs when load is suddenly removed from the generator. The most obvious example of this is the breaker connecting the generator to the power grid opens. This results in a full load rejection. Load pick up means the generator is supplying power to a given load. When a generator comes on line, it will pick up some load that might have been supplied by another generator.
What change occurs in flux when load increases in DC shunt motor?
no change occurs because the flux is controlled by the supply and not the load on the generator. thus flux doesnot change unless the supply changes
How is a Load applied to a ac generator?
The load conductor is connected to the load side of the generator breaker. Once the generator is up to speed the load breaker is closed and the voltage is then applied to the load.
How to compute the minimum load of 16 MW generator?
A generator, rated at 16 MW, should be able to continuously supply a load of 16 MW. You don't need to compute its 'minimum load', because the minimum load will be zero watts! In other words, you can run the generator with no load whatsoever if you wish to waste fuel.The point is that the power supplied by a generator is determined by the load, NOT by the generator itself -so it is important that the generator is capable of supplying the maximum load applied to it. A generator's 'rated power output' simply tells us the maximum load it is capable of supplying.
Can DC series generator start on no load?
yes.it is possible to start dc series generator on no load condition
How does the load affect voltage output of a series generator?
In a series generator, as load is added, output voltage increases.
What is the basis of a generator load?
The load on a generator is a general word for whatever device is connected to it to use the power that is being generated.
What should we do We have a 2 MW gas generator It has detonation problem whenever the loads cross 1.3 MW we tried increasing revolution by unloading reducing throttle opening enriching mixture.?
What should we do We have a 1.1 MW gas generator It has detonation problem whenever the tarque load increase or decrease 50KW generator start the hunting and detonation after this condition generator tripp.?
How does a generator adjust to the load?
50
What is meant by load in diesel generators?
Any device that uses the generator to supply its operating voltage is electrically classed as a generator load.
Why electric generator drop the load?
Too much load for the generator, the generator began to under speed / overspeed, the governor / part of the generator went into failure, the generator capability was not up to the requirements placed by the system (needing to push out/pull in too many VARs), etc. there are many reasons for a generator to drop a load. Because a load dropped, this does not infer that the generator was the cause either (fault on the system, system instability limits reached, system protection tripped - non-generator related protection).
What would cause the breakers on my generator to pop when they are not being over loaded?
your generator may be putting out too much voltage. that is it should be 115-125 volts check it with a voltmetet when running under load. also if a surge of load occurs, the breakers may not be overloaded in normal running conditions, but if a motor starts, it's starting load may be more than the breaker can hold. you may have to size the breaker for the starting motor load, not the running load also, if your generator is running on low voltage, that will increase the amperage on the served appliances. the breaker will then trip
