no change occurs because the flux is controlled by the supply and not the load on the generator. thus flux doesnot change unless the supply changes
A shunt DC motor connects the armature and field windings in parallel or shunt with a common D.C. power source. This type of motor has good speed regulation even as the load varies, but does not have the starting torque of a series DC motor
A DC shunt motor is a motor using DC supply with the the inductor connected parallel to the armature.
Yes, it is correct to say that with a fixed field voltage, the speed of a shunt motor is proportional to its armature voltage. This relationship arises because, in a shunt motor, the back EMF (electromotive force) is dependent on the speed and armature current. As the armature voltage increases, the armature current increases, leading to a higher speed until a new equilibrium is reached, assuming the field current remains constant.
Dc shunt motor is constant speed motor.Its speed is constant with armature current.This shunt motor is used in paper mills and drilling machines
Answer:If the shunt winding is open the motor won't start, but if the shunt open while the motor is running, the motor will keep on running as if nothing went wrong, except if the wire of the winding get maniacally between the stator and the fields the motor can be damaged beyond repair. But normally the shunt windings is done with very thick conductors, so the chance that the shunt will go open is zero.
applications of series motor
applications of series motor
DC Shunt motor
It could be anything, it depends on the design of the motor and whether it is a high-power or a low-power motor.
A series motor respond by decreasing its speed with small increase in current for a given load torque. A shunt motor holds its speed nearly constant with large increase in input current for same amount of load torque
A shunt dc motor has quite different characteristics from a series motor. Wired in series, the same current passes through the armature and the field winding and it is most unlikely that a shunt motor would have a field winding that is suitable for this. Therefore a shunt motor cannot be wired as a series motor in general because its field winding is designed for only a small current.
DC shunt motor can be reversed by changing the polarity of either the armature coil or the field coil.