Want this question answered?
a is b and i dont know
Using DCSP when welding thin material causes more heat to be concentrated in the electrode than in the base metal. This prevents the arc from burning thru thin materials before the electrode melts.
As a result he lost his job
When you increase voltage (V) then, to get the same total power (W), the current (I) must be decreased. This result comes from the Power Law: Power = voltage x current Ohms Law does not deal with power at all, it deals only with the relationship between voltage, resistance and current: Voltage = resistance x current
You can block AC current by using a filter with a pass-band that is outside the frequency of the AC current.
from the generator, to the active electrode, through the patient's body, to the dispersive electrode, back to the generator
The advantage of using the glass electrode for determining the PH of a solution is because the glass electrode is very sensitive to any change.
Reverse. Using a D C machine, electricity travels from the negative post to the positive post. Connecting the electrode holder to the positive post and the ground clamp to the negative post means the current flows from the work to the electrode - reverse polarity. In A C machines it doesn't matter which post the electrode holder is connected to.
The electrodes are able to pull the fragments towards the ends of the gel. If you're using DNA, which has a negative charge, it will be attracted to the positive electrode.
a is b and i dont know
309l
The electrodes must be kept dry.
..using the formula Voltage(V)=Current(I) * Resistance(R) .. we can get the result ...current will be 5 Ampere
electrosection
Almost all electrodes have a series of numbers to tell #1 what the tensile strength of the weld will be, #2 what electrical current to use, #3 what position/s it can be used in (ie: flat, vertical etc.) Ex. E - 7018. E = electrode, 70 = 70,000 lbs tensile strength, 1 = all positions, 18 = AC or DC reverse polarity current. (welding lead +)
Solutions to problems with staffing include contacting recruitment and staffing agencies and using their advice and applying it to your current staffing situation.
You need a source of electrical potential difference, also known as voltage (which is the technical term for what for you call "electric pressure"). The easiest and most common voltage source is a household battery. Hook up the positive electrode of the battery using a conductor (eg. a copper wire) to one end of your circuit and the negative electrode to the other end, and voila, you'll have electric current flowing through your circuit.