When overhauling an engine, you need to consider the condition of the engine block, heads, crank, and camshaft. Any of these may need resurfacing or replacing, and the cost may be high enough to look at a complete replacement engine.
With proper maintenance, the camshaft should last the life of the engine.
To run overhead on a c7 Cat engine, you will have to adjust the valves in order to return them to where they should be. In order to do this you will need feeler gauges in order to bring it back to where they were set by the factory.
With proper maintenance and care it should.
With proper regular maintenance, you should be good for 200k miles.
you can run without one but you should have one to maintain proper engine operating temperature
Edsal shelving is easy to install if you have all the proper tools. If you are unsure, you should consider hiring an expert.
You should have a thermostat that keeps the engine coolant temperature at 180 or 195. If you are in a cool climate the 195 will work best.
With the engine not running you should read 12.6 volts on a fully charged battery. With the engine running you should read from 13.5 to 15.5 volts at the battery posts.
The engine number on a Fiat Uno Fire engine should be on a metal plate along the bottom side of the chassis. If the number is not there, contact a Fiat dealer to help locate the proper engine number for your vehicle.
you should consider learning proper English before chemistry, fool.
Once the engine warms up it should be in between 600-800 rpms.
If the old mounts were compressed over the years, there could be a small lift of the engine with new mounts. If the lift is more than an inch or so, you should check that the proper mounts were installed.