Want this question answered?
The DHCP protocol.
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the sub net mask and default gateway. For any further detail, so you can visit this website:http://www.iyogibusiness.com Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway. RFCs 2131 and 2132 define DHCP as an Internet Engineering Task Force (IETF) standard based on Bootstrap Protocol (BOOTP), a protocol with which DHCP shares many implementation details. DHCP allows hosts to obtain necessary TCP/IP configuration information from a DHCP server. If you want to more further detail so you can visit this website:http://www.iyogibusiness.com DHCP (Dynamic Host Configuration Protocol) is a network protocol that enables a server to automatically assign an IP address to a computer.
DHCP - Automatically provides client computers and other TCP/IP-based network devices with IP addresses
Dynamic Host configuration Protocol different IP address every time it connect to the network (How to work DHCP server):- It Provide IP address in any system in the follwing four step :- 1) Dynamic Host Configuration protocol Lease Request. 2) Dynamic Host Configuration Protocol Lease Offer. 3) Dynamic Host Configuration Protocol Lease Selection. 4) Dynamic Host Configuration Protocol Lease knowlegment. 1) Dynamic Host Configuration Protocol Lease Request :- At first client prepare a packet and broadcast from searching the Dynamic host configuraiton protocol server. 2) Dynamic Host Configuration Protocol Lese Offer : Now the Dynamic host configuration protocol server select the internet protocol address from the scope the give the offer to the clients ,if more than one dhcp server if present in network than the dhcp server in which offer come enough first basic provide ip address. APIPA(Automatic Private ip Addressing ) : In case DHCP server not ip addressing provide so this situation by APIPA ip address provide from clients side It range the IP address 169.254.0.1 to 169.255.254 in this case the client which broadcast massanger at first time will take specific IP from APIPA after this it always contect every five minutes to any Dynamic host configuration protocol server. 3) Dyniamic Host Configuration Protocol : When client take the offer then the Dynamic host configuration protocol server send the selected IP address from the client. 4) Dynamic Host Configuration Protocol : After giving the IP address given the server send massage Dynamic host configuration protocol client.
Dynamic Host Configuration Protocol (DHCP) A protocol that provides a means to dynamically allocate IP addresses to computers on a local area network. The system administrator assigns a range of IP addresses to DHCP and each client computer on the LAN has its TCP/IP software configured to request an IP address from the DHCP server. The request and grant process uses a lease concept with a controllable time period.
Dynamic Host Configuration Protocol(DHCP) Server is used to distribute IP in the network automatically from the range specified in the DHCP Server while creating scope. -- By MyNarutoAnime ----
No idea. Below information obtained here: http://support.microsoft.com/kb/169289 may help. DHCP (Dynamic Host Configuration Protocol) is a standard protocol defined by RFC 1541 (which is superseded by RFC 2131) that allows a server to dynamically distribute IP addressing and configuration information to clients. Normally the DHCP server provides the client with at least this basic information: • IP Address • Subnet Mask • Default Gateway Other information can be provided as well, such as Domain Name Service (DNS) server addresses and Windows Internet Name Service (WINS) server addresses. The system administrator configures the DHCP server with the options that are parsed out to the client.
There are many different hosting services but the one that was the most beneficial and cost-efficient for me was this one https ://yazing .com/deals/bluehost/4everblest (just remove spaces, it's an affiliate link but it's a great deal with this link as a coupon code)
There is no single protocol used between a server and a client; the protocol depends on what the server and client are doing and how they are currently communicating.
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway. RFCs 2131 and 2132 define DHCP as an Internet Engineering Task Force (IETF) standard based on Bootstrap Protocol (BOOTP), a protocol with which DHCP shares many implementation details. DHCP allows hosts to obtain necessary TCP/IP configuration information from a DHCP server.If you want to more further detail so you can visit this website:http://www.iyogibusiness.com
The DHCP server (Dynamic Host Configuration Protocol)What is DHCP?Dynamic Host Configuration Protocol (DHCP) is a network protocol that enables a server to automatically assign an IP address to a computer from a defined range of numbers (i.e., a scope) configured for a given network. DHCP assigns an IP address when a system is started, for example:A user turns on a computer with a DHCP client.The client computer sends a broadcast request (called a DISCOVER or DHCPDISCOVER), looking for a DHCP server to answer.The router directs the DISCOVER packet to the correct DHCP server.The server receives the DISCOVER packet. Based on availability and usage policies set on the server, the server determines an appropriate address (if any) to give to the client. The server then temporarily reserves that address for the client and sends back to the client an OFFER (or DHCPOFFER) packet, with that address information. The server also configures the client's DNS servers, WINS servers, NTP servers, and sometimes other services as well.The client sends a REQUEST (or DHCPREQUEST) packet, letting the server know that it intends to use the address.The server sends an ACK (or DHCPACK) packet, confirming that the client has a been given a lease on the address for a server-specified period of time.
A DHCP (Dynamic Host Configuration Protocol) scope defines the valid pool of IP addresses that can be assigned to the network. You need to activate a DHCP scope so that the IP addresses that are issued (or leased) to the client devices will be compatible with the network configuration. If a client is issued an invalid IP address it will not be able to communicate on the network.