Routing Information Protocol (RIP)
The routing protocol also specifies how routers in a network share information with each other and report changes. The routing protocol enables a network to make dynamic adjustments to its conditions, so routing decisions do not have to be predetermined and static.
RIP is a protocol used by routers to exchange information about their routing tables. In dynamic routing, a router learns from other routers about possible routes by advertising what they know. RIP is a protocol that can do that.
RIP is a routing protocol - a protocol (set of rules) that allows a router to exchange information, with other routers, about existing routes.
Flat routing protocol is a network communication protocol implemented by routers in which all routers are each other's peers. Flat routing protocol distributes routing information to routers that are connected to each other without any organization or segmentation structure between them. Flat routing protocols are primarily those that don't work under a predefined network layout and perimeter. They enable the delivery of packets among routers through any available path without considering network hierarchy, distribution and composition. Flat routing protocol is implemented in flat networks where each router node routinely collects and distributes routing information with its neighboring routers. The entire participating node addressed by flat routing protocol performs an equal role in the overall routing mechanism. Routing Information Protocol, Interior Gateway Routing Protocol and Enhanced Interior Gateway Routing Protocol are popular examples of flat routing protocols.
Routing protocol is used to dynamically learn routing information so routers know where to send packets. The only other option is to manually define all routers within a network which would be very impractical.
Configure routing protocol authentication.
It prevents routing loops. It enables routers to communicate via four types of messages.
It allows a router to share information about known networks with other routers.
link-state routing protocol
rip is short for routing information protcol it is a routing protocol that shared routing tables from 1 router to another to a maximum of 16 hops of 16 routers
A routing protocol is a protocol that routers use to tell each other about available routes. Some of the routing protocols include RIP, EIGRP, OSPF, IS-IS, BGP.
Routing Information Protocol = RIP
Open Shortest Path First (OSPF) is a type of routing protocol known as an interior gateway protocol or an interior routing protocol. The routers in an internet are responsible for receiving and forwarding packets through the interconnected set of networks. Each router makes routing decisions based on knowledge of the topology and traffic/delay conditions of the internet. The routing protocol between routers is used to exchange topology and traffic delay information. An interior routing protocol is used within a portion of the internet called an autonomous system, which simply means a connected set of routers that are managed by a single organization. OSPF is the most commonly used interior routing protocol.
BSP (Border Gateway Protocol) A complex routing protocol used on border and exterior routers. BGP is the routing protocol used on Internet Backbones.
Perhaps you mean the "passive-interface" command in Cisco routers; what this does is that no information related to the routing protocol will be sent through the specified interface. For example, the interface that connects your network to the ISP should not carry any routing protocol information, since the routing protocol is only useful within your company's network.
It Allows a router to share information about known networks with other routers...Momin-OBS Bangladesh
BGP (Border Gateway Protocol) is the most widely used protocol between different ASCaps-lock
In a distance vector routing protocol, such as RIP or EIGRP, each router sends its routing table to neighboring routers. The routers don't know the topology, i.e., how other routers are interconnected. In a link state routing protocol, such as OSPF or IS-IS, routers first exchange information about connections within the network (or an area of the network), and build a topology table. Then each router uses Dijkstra's algorithm to calculate the best route to each destination.
BGP (Border Gateway Protocol) is the most widely used EGP today.
RIP stands for routing information protocol. It is an intra domain routing protocol.
Enhanced Interior Gateway Routing Protocol (EIGRP) was once as Cisco Propitiatory routing protocol for Cisco routers. However many routers that are not Cisco now support the use of EIGRP.
RIP listener waits for route updates sent by routers that use the routing information protocol in a corporate LAN.
RIPv1: Routing Information Protocol version 1. Ripv2: Routing Information Protocol version 2. EIGRP: Enhanced Interior Gateway Routing Protocol.
Dynamic routing is a networking technique that provides optimal data routing. Unlike static routing, dynamic routing enables routers to select paths according to real-time logical network layout changes. In dynamic routing, the routing protocol operating on the router is responsible for the creation, maintenance and updating of the dynamic routing table. In static routing, all these jobs are manually done by the system administrator. Dynamic routing uses multiple algorithms and protocols. The most popular are Routing Information Protocol (RIP) and Open Shortest Path First (OSPF).
It is a Hybrid routing protocol. It provides configurable metrics. It establishes formal neighbor relationships among routers.
Asked By Wiki User
Asked By Wiki User