around 150 psi....no more than 20 psi difference between cylinders.
The 1983 Cadillac Deville oil pressure sensor can be found on the side of the engine. The oil pressure sensor will be on the left-hand side of the engine.
A 1983 Chevy 307 engine typically operates best at a temperature range of 180 to 210 degrees Fahrenheit. Maintaining this temperature helps ensure optimal engine performance and fuel efficiency. If the engine runs significantly hotter or cooler than this range, it may indicate issues such as a faulty thermostat or cooling system problems that should be addressed. Regular monitoring of the temperature gauge can help prevent potential engine damage.
The fuel pressure for a 1983 Chevy 305 V8 engine typically ranges from 5 to 9 psi when the engine is running. It's important to check the specific fuel system setup, as factors like modifications or the type of fuel system (carbureted vs. fuel injection) can affect this range. Always refer to the vehicle's service manual for the most accurate specifications.
Right by your oil filter
the best that i know is to take out engine mounts and jack up the engine then it should be easy
The 1983 Chevrolet S10 was made in three engine model trims, each with different curb weights. The curb weights range from 3076 to 4145 pounds.
Depending on the engine, if your car has the v-8, the fuel pressure is regulated by the fuel pump output. Normal pressure would be 6-9 psi at the carb inlet.
Remove the breather, and it will be located on the back of the throttle body.
what is the fuel pressure on a 1983 Lincoln mark 6
Use SF quality oil or better. Viscosity should be appropriate for the climate you are in.
between 17 to 19 MPG.
Cracking Under Pressure was created in 1983.