Want this question answered?
Rims,Body Kit, Lowering,Tints.
make sure the gapping on the plug is correct to what the vehicle needs
Daimond is just a brand name. Mobil makes a synthetic that will work perfectly. There are other makers of this SP3 fluid. Make absolutely sure that the fluid I use is compatible.
check the servo assembly located under the EFI,or have it replaced
Yes, with very little to no modification, from what I understand you can use the same trany from your 03 as well as the computer, and the motor should line up with mounts no problem. Make sure the motor you're trying to drop is a 6G75 3.8L and not a 4G69 2.4L.
The 2.4 liter - 4 cylinder and the 3.0 liter - V6 engines in a 2001 Mitsubishi Galant are both INTERFERENCE ENGINES , according to Gates ( they make timing belts etc . )
Yes , according to the Gates website ( they make timing belts etcetera ) the2.4 litre four cylinder engine in a 2005 Mitsubishi Galant IS AN INTERFERENCEENGINE
24" drivers side and 18" passenger side. That said, still check by vehicle make, model and year for the brand of wiper blades you decide to go with.
Check with a "good" mechanic. They will hav a aual that outlines the average "shop" time to make this repair. They will give this info to you no chage.
Yes, it would. While the Throttle plate is closed when not pressing on the gas pedal. The IAC is a bypass passage that allows air to continuous flow to the engine. I just had the same problem with my 2000 Mitsubishi Galant. I unplugged the IAC and the engine no longer wants to stall out, it just runs at a higher RPM to compensate for the nipple on the IAC not moving back to create the bypass passage.
No, the only thing it would do is make the engine run hot. However, if the leak is large enough and low enough, the coolant could leak out fast enough to destroy the engine. You should get it fixed.
The Mitsubishi Galant has the most common hook-end wiper arms. See Sources and Related Links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.