This is a trick question right?
The length of an aircraft is the longest portion of the airplane (usually the fuselage)
If you are asking about published ratings this would be with out optional probes and nose extensions etc.
Barrel length is measured from the bolt face to the end of the barrel.
It is: cross-section area*length and measured in cubic units
Two points determine a line and lines have no limit to what their length can be. North South East or West, it matters not, a line will extends forever. Therefore, it cannot be measured.
The length and width of a parallelogram, as normally measured, does not provide enough information to determine its area.
The length of the radius of a circle is measured by a straight line from the centre to the edge. The length of the diameter of a circle is measured by a straight line from one side, through the centre, to the other side. The length of the circumference is calculated by multiplying the diameter by the constant pi... which is usually approximated to 3.1416.
Length is measured in meters.Length is measured in meters.Length is measured in meters.Length is measured in meters.
The length of a pencil is best measured in centimeters
First, determine the width (in). The width (in) is calculated to be : 6. Next, determine the length (in). The length (in) is measured to be: 12. Next, determine the millage. The millage is found to be: 3. Finally, calculate the Poly Bag Weight using the formula above:
The length of a house can be measured in dekameters.
The calculated length is more accurate then the measured length (that is if your math is correct)
The length, width, or height of a solid figure is measured in units of length. The area of the figure's outside surfaces is measured in squared units of length. The volume of space filled by the figure is measured in cubed units of length. The mass of the figure is measured in units of mass. The weight of the object is measured in units of force. The age of the figure is measured in units of time. etc.
length is measured in metres.