0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you adjust the stitch tensions on a single-needle lockstitch machine if it is unbalanced?
to increase the stitch length,turn the stitch length dial (1) to decrease the stitch length,turn the stitch length dial (1) while pressing the feed lever
What does the stitch width dial do on a sewing machine?
You should have an instruction booklet with your machine. That will show you where everything is. This will vary from machine to machine with some being simple and others you should be a rocket scientist to use. The stitch width selector is pretty self explanatory. You use it to select the width of the stitch you want to use in a zig zag stitch.
How do you use Elna Super cams?
Adjust Elna SU machine as follows: Set the stitch width knob and the stitch length dial at 0 If there is another Elna-disc in the automatic stitch control (called the elnagraph), remove it by pressing the button Put the Elna-disc you want to use in the Elna graph with the circular mark over the driving pin and press the Elna disc down For single elna discs: Use embroidery and buttonhole foor for filled designs with raised effect and the sewing foot for linear stitches iwthout any raised effect. 1. After inserting the Elna-disc in the Elnagraph, and with the stitch width knob and the stitch length dial on "0", turn: 2. the selector to A (automatic) 3. the needle position to the centered position (red mark) 4. the stitch width knob with the straight mark on top to a position between 1 and 4, as desired 5. the stitch length dial to a position between 1/4 and 4, as desired 6. the stitch is then sewn automatically 7. Position the circle on the Elna-disc opposite the white arrow, by turning the flywheel; this shows the beginning and the end of each automatic stitch or design. For double elna discs: Use embroidery and buttonhole foor for filled designs with raised effect and the sewing foot for linear stitches iwthout any raised effect. 1. After inserting the Elna-disc in the Elnagraph, and with the stitch width knob and the stitch length dial on "0", turn: 2. the selector to A (automatic) 3. the needle position to the centered position (red mark) 4. the stitch width knob with the straight mark on top to a position between 1 and 4, as desired 5. the stitch length dial on A, as desired 6. the stitch is then sewn automatically 7. With the stitch length dial at A, the stitch length should normally be correct. However, for certain very intricate stitches (true hemstitiching with disc 101, 126, 140 or 142) sewn with double Elna-discs, it may be desirable to lengthen or shorten the pattern to adapt it better to the material and thread used. 8. If the stitch is too short ant A, turn the dial to "+". 9. If the stitch is too long a A, turn the dial to "-"
What is a dial up number?
.what is a dial up number
Is your dial-up number the same as your home phone number?
Usually, the term "dial-up number" refers to the phone number you dial with your modem for dial-up Internet.
What is the function of the stitch selection dial on a sewing machine?
well, the stitch selection is for if you want a zigzag stich for a zig zag line. you can chose what the pattern of your line will look like. If you want to make a bracelet with a cool look to it, i suggest you turn the dial to the one you like best. If the pattern it will make is not shown on the dial, you can look in the hand book if you got one. If not, just google your machines model and put stich dial at the end of the name.
What year was the pfaff 260?
The Pfaff 260 was produced in 1960. It was the next to last version of the dial-a-stitch models made by the company.
What number do you dial on dial 4 love?
143
Why wouldn't the four wheel drive engage on your 1998 Ford F-150?
is it the turn dial 4x4 selector or the manual selector?if its the dial it could be a bad motor that engages the hubs. It could be the vacuum switches in the engine compartment on the passenger side, with ours it was the one that kept it in 2 wheel drive that was gone, vented vacuum so 4x4 would not pull in.
Does 4WD on 2001 explorer automatically engage?
If you have the Control Trac 4 x 4 system and the rotary selector dial is in the auto position , yes it does
How i can know or to dial private number?
If you don't know the number then you cannot dial it. If a number is not listed then you can be assured that there is a reason for that.
Motorola v170 tracfone speed dial instruction?
Look in your phone book. Each number there has a speed dial # assigned to it as the speed dial number. On your main screen, which shows you remaining minutes, push the speed number of the person you want to dial, then the # sign, then the green "send" button. It will dial the person whose speed dial number you pushed.
