Want this question answered?
step slowly on the brakes
pressing on the brake pedal lightly for a short distance
Yes You don't have to drive in low gear. If you go through a large, deep puddle and then have a clear road, you can drive fast and lightly touch your brakes or firmly press them a couple of times. It doesn't take long but test them to see.
Yes You don't have to drive in low gear. If you go through a large, deep puddle and then have a clear road, you can drive fast and lightly touch your brakes or firmly press them a couple of times. It doesn't take long but test them to see.
if it is a big puddle the water when splashed might be hiting a sensor if it is a big puddle the water when splashed might be hiting a sensor
No, that is not true. Water is going to get on the rotor and on the pads no matter what you do. This water will quickly evaporate once you apply the brakes. Even if you do not apply the brakes centrifugal force will remove the water as you drive. Once you apply the brakes the heat created will remove the water very quickly. You may experience a slight loss of good braking the first time you apply the brakes after going through water which is normal.
Not that I know of but have a mechanic check to see if there is a stick or something caught behind a wheel.
When a car drives through a puddle of water, the change that takes place in the puddle is a physical change. Of course, chemical changes will take place in the engine of the car, but that's probably not what you are asking.
going through a deep puddle will cause water to get into your Distributor causing the spark plugs not to fire, take off the distributor cap and make sure its dry as a bone
You went thru a deep puddle with hot brakes. The disc gets doused in cold water and warps.
one of the ssensors got water in it
96 S10 chev pickup after driving 80 miles you parked and had a big puddle of water over flow when parked?