answersLogoWhite

0

Check that the crane or hoist is not tagged with an out-of-order sign.

Check that all motions agree with control device markings e.g., Up/Down/Fwd/Rev.

Check that all motions do not have excessive drift and that stopping distances are normal.

Check hook for damage, cracks, nicks, gouges, deformity of the throat opening, wear on saddle or load bearing point, and twist.

Check that hook latch, if provided, is not missing and that it operates properly.

Check wire Rope for Broken Wires, Excessive Wear, Kinks, Crushing, Stretching, and Birdcaging.

Check load chain, including end connections for for excessive wear, twist, distorted links or stretch, beyond the manufacturer's recommendations.

Check that the upper limit device stops lifting motions of the hoist load block before striking any part of the hoist or crane.

Check for any sign of oil leakage on the crane and on the floor area beneath the crane.

Check for any unusual sounds such as Squealing, Grinding, Unusual vibration from the crane or hoist mechanism while operating the crane and hoist.

Check that warning and other safety labels are not missing and that they are legible. Check that audible and visual warning devices are operational.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

I'd like to get my crane operator certification. Where should I start?

It is actually required to be certified before you can operate a crane. You must contact your local construction agency in order to get certified.


How do you change a clutch on a Perodua Nippa?

You have to remove the engine and gearbox. you will need a engine crane. Once you have the engine and box out, remove gearbox from engine and replace clutch, Refit gearbox to engine, put engine and gearbox back in car. Easy job if you have access to a engine crane.


What is the notice during the operation of MG Double Girder Gantry Crane?

Azeus Crane Co., Ltd: 1.The normal environment temperature of the crane is between -25℃ to +40℃, the average temperature of the whole day can not exceed the 35℃. 2. The altitude of Installation site is within 2000m. The motor capacity should be checked if the altitude is more than 1000m.


How can thruster brake fail in electromagnetic crane?

Following are the reasons for thruster brake failure: - Low oil level. the oil level should be regularly checked for healthy operation. - Motor disc coupling.


What did tree ear give crane man before he left?

Tree-ear gave clay monkey to crane-man before he left on his journey.


What is the Hazard of using lifting crane to move engine?

u can die


What were Stephen Crane's last words before he died?

you


Where can an engine crane be bought?

An engine crane or hoist can be purchased at Auto Zone, Amazon, Sears, Harbor Freight, Southern Tool and Ebay. If you are interested in saving some money you can purchase a good used one at Aspene Equipment.


What is a crane sensor for a 1994 Ford Explorer?

There is a crankshaft position sensor , at the front of the engine


What is a German engineers engine called?

a derrick. it is a large crane used for carrying things.


Is it possible to mount a V555 cummins engine on a grove crane which originally had a V504 cummins engine mounted on it by the manufacturer?

Yes, it is possible to mount a V555 Cummins engine on a Grove crane that originally had a V504 engine, but it would require modifications. The V555 is larger and may have different mounting points, cooling requirements, and weight considerations. Additionally, adjustments to the crane's transmission, electrical systems, and possibly the hydraulics may be necessary to accommodate the new engine. It's essential to consult with a qualified technician or engineer to ensure compatibility and safety.


What was Marty Crane's profession before he retired on Frasier?

Police Officer