Want this question answered?
Between compressor suction and reversing valve,also called true suction.
Between compressor suction and reversing valve,also called true suction.
On split system installations, the suction line should be pitched towards the compressor at least Suction line should be insulated for 2 reasons: 1) so it does not drip condensation everywhere it passes through the homes interior space. ie attic, inside walls etc. 2) cool suction gas is what cools the compressor motor during operation, insulating the pipe carrying it helps prevent that gas from picking up heat from the surrounding air ensuring it remains an effective coolant for the motor. The original reply was also correct, an effort to pitch the suction line towards the compressor should be madr wherever possible to aid in oil return.
The total voltage of the batteries or DC power source connected to a shunt motor affects how first it moves. Increasing the DC voltage will make the shunt motor run faster.
for a given air conditioner: the faster the condenser (outdoor) fan the lower the suction pressure. the faster the evaporator (indoor) fan the higher the suction pressure.
Fan blower motor?Hi-speed relay badSwitch?Motor winding bad
No load speed is the speed that the motor run when it has no load, i.e., the motor is separated from the engine, that speed is than greater than the rated speed, because the rated speed is the speed whwn the motor are linked to the load and it is the full load.
synchronous motor is a constant speed motor because it will only run at a synchronous speed or not at all.the speed can be changed by changiing the frequency only ns=120f/p
between the comp and the reversing valve
The change over time will vary with the type of motor, size of motor and the connected load to the motor. The time should be adjusted so that the motor is up to speed and stabilized at the star speed. It is at this point that the change to delta should take place. One thing to note is, do not leave the motor running is the star position any longer that it needs to.
Dc shunt motor is constant speed motor.Its speed is constant with armature current.This shunt motor is used in paper mills and drilling machines
Variable