0
What else can I help you with?
How do you adjust a clutch on 1990 Jeep Wrangler?
This should have a hydraulic clutch and would not be adjustable
When should you replace the clutch on M3?
The clutch should last approx 150,000 miles. There is no need to replace this if it isn't abused
How to adjust a clutch in a 88 ford 250 diesel truck?
has a hydraulic clutch should not need any adjusting. either needs bleeding or needs a clutch.
What should be done to correct a clutch that will not disengage on a 1994 HD sportster?
A clutch not disengaging is usually a hydraulic issue. Check your clutch fluid. Then check your clutch master and slave cylinders for leaks.
Where is the hydraulic clutch reservior in 1987 Volvo?
It is the same as the brake reservoir. You should see a line heading from that to the clutch master cylinder. Cheers.
How to adjust the clutch on 1996 Saturn SL1?
To the best of my knowledge, the clutch on this vehicle is hydraulic and does not need to be adjusted manually. If you are having trouble engaging the clutch or shifting you should have your clutch checked to see if it needs to be replaced. I had, what sounds like, the same problem with my clutch. I own a 1995 Saturn SL2 with a hydraulic clutch. I COULD NOT put car into gear, whether the car was running or turned off. It turned out that the hyrdaulic clutch was out of hydraulic fluid. I took it to my mechanic, (I hadn't the slightest clue what could be causing this). He took a look and filled the clutch with hydraulic fluid and said it works just fine now. He said he didn't see a leak, or any indications of a leak. So we will see. But the short of it is, your (hydraulic) clutch may just need hydraulic fluid.
How far should a clutch give?
The amount of free play depends on what vehicle you are asking about. It also depends on if it has a hydraulic or manual clutch. Need more information.
How long to replace a Nissan skyline clutch?
I can do it in about 2.5 hours. Any competent mechanic should also do it in under 4 hours. But they will charge for 6-8 hours FYI
How do you disconnect the hydraulic clutch line on a 93 ford ranger?
special tool pushes the white clip in and line should pop off, something after being on there so long they actually seize and you have no choice but to cut and replace
Your clutch catches at the very end How do you make the pressure more in the middle so it feels correct?
Clutch adjustment 3000gtCheck the clutch pedal stroke. If it is around 6.29 inches you need a new clutch. measurement from the face of the pad to the firewall should be 6.97 - 7.17 inches for FWD cars or 7.2 - 7.4" for AWD cars . There is an adjustment bolt to adjust pedal height however a worn clutch is not adjustable because 3000gts are hydraulic. You may also want to check the fluid in the master and bleed the hydraulic system. On All wheel drive vehicles the distance from the toe board to where the clutch disengages should be 2.2"measured with engine runningIf none of this works, you probably need to replace the clutch as a worn clutch will give you the symptoms you have also.
How much should it cost to replace a clutch on a 1999 Mazda Protege?
It can run between $160 and $250+ to replace the clutch on this car. It depends on the part price, and the charges for the person replacing the clutch.
Should you replace your clutch master cylinder when replacing clutch?
At least the slave cylinder. The clutch master cylinder can be replaced at any time.
