0
41 to47 psi
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What should the fuel pressuse on a 1993 corvette be?
The pressure should be 44-47 psi on LT1.
What is the fuel pressure for Lt1?
Earlier carb type LT1 6 1/2-7 psi Fuel injected Vettes and Camaro aprox 45 psi.
Will a engine from a 1996 Corvette fit on the engine mounts in a 1975 Corvette body?
Yes, the mounting position is the same, but the actual mounts are different. Bolt the mounts from your 1975 corvette to your 1996 LT1 engine and it should go right in. The transmission should also bolt right up to your 1996 LT1 engine.
Can you swap a l99 directly out with a lt1 in a 1996 caprice?
no because the lt1 has a different transmission bellhousing
How much horsepower a 1996 lt1 camaro?
285 hp
Where to buy corvette lt1 5.7 fuel rail covers?
== ==
95Z28 LT1 was running fine put gas in it and it didnt start after about 2 mins it started and on my way home it started acting up and quit once i got home it turns over but does not start any ideas?
Try using a little starting fluid to see if it will run briefly. If it starts then dies as soon as you quit using starting fluid, the problem is related to fuel. Check the fuel pressure at the injectors. Most vehicles have a fuel pressure test port and you should be able to find out the proper fuel pressure for your vehicle/engine. If fuel pressure is low or non-existant, check the fuel filter and the fuel pump.
What octane fuel to use in a 95 Buick Roadmaster?
87 the de-tuned LT1 will not run as efficiently on higher grade fuel
Will heads off a 1996 chev LT1 fit on a 1974 350?
no
Where is the fuel pump regulator in a Camaro?
On the fuel rail on TPI, LT1 and on the throttle body if it's TBI.
How much horsepower does your 1996 Chevrolet Camaro z28 with an lt1 motor have?
285
Will the intake from a 4.3 liter V8 multi-port fuel injected that looks like an LT1 fit on an LT1 long block?
no, the 4.3 liter is a V6
