Could be too thick of oil used.
Oil pressure should be 40 to 50 psi
the pressure
The oil pressure switch is located on the oil filter adapter. Find the oil filter and you should see the oil pressure switch.
Oil pressure varies but should normally be around 40psi
A low oil pressure reading when idling for a 1986 Fiero is normal. As long as the oil pressure goes back to normal when the car is being driven, there should be no problem. If it is not, then the oil pressure sensor or the oil sending unit should be looked at.
The oil pressure switch should be above the oil filter on the back of the engine on a 2.2L.
The 1987 Chevrolet Corvette oil pressure should be between 45 PSI and 40 PSI. The idling oil pressure will be slightly less.
about 6 quarts
about 6 quarts
Use whatever the original cap was, probably 15 psi.
no