I have a loose suture inside my belly. What should i do?
Best Answer:Sash Clamp is used to clamp together when it is glued.
A bar clamp is used for making clamps
use for clamp the iron stand gently
these are 2 types of pinch clamps (where you pinch the clamp and when you let go it clamps
Visit a doctor
To fix a loose vacuum hose on a 2002 GMC Envoy, it can be clamped with a small hose clamp. Use a metal clamp that can be adjusted to fit the small hose.
What should you call a man with a clamp
The radiator hose is cracked near the clamp; or the clamp is loose; or the thermostat housing gasket is worn.
Loose hose clamp or fitting? Thermostat housing loose? Expands when gets hot
you may have a loose clamp holding it. You could have a rock in it.
The 1998 Chevy Astro lower radiator hose is held in place with a clamp. Turn the clamp screw to the left. The clamp will become loose and the hose can be removed.
Assuming this is a loose and rattling exhaust heat shield, the more effective repair is to use a large worm drive style hose clamp to tighten it. It may be necessary to use more that one clamp joined together. Put the clamp around the loose area of the heat shield and tighten it.
The radiator hose is held in place with a clamp on each end of the hose. Turn the clamp screw to the left. The clamp will become loose in the hose can be removed. Reverse the process to install the new radiator hose.
Yes, when fitted on the proper size hose they will hold consistent pressure where a screw type of clamp will get loose as the hose ages and shrinks.Yes, when fitted on the proper size hose they will hold consistent pressure where a screw type of clamp will get loose as the hose ages and shrinks.
Take the clamp bolt loose and pull and pryl it up.
If you get it done by a professional, only the clamp should hurt, but I doubt that the clamp hurts too much.
It is quite unlikely but it's best to get checked incase a clamp has moved or just worn loose over the years