0
What else can I help you with?
Your drivers door entry key pad isn't working Where should you start?
Check the battery in your key pad.
Why does how to jumper-start a car battery include this image the instructions?
from a dead battery to working battery
How do you jump start a car, and should the red or black cable be connected first?
To jump start a car, first connect the red positive cable to the positive terminal of the dead battery, then connect the other end of the red cable to the positive terminal of the working battery. Next, connect the black negative cable to the negative terminal of the working battery, and finally connect the other end of the black cable to a metal surface on the car with the dead battery, away from the battery. Start the working car and let it run for a few minutes before attempting to start the dead car. The red cable should be connected first.
Can you jump start the battery on a 1998 Chevy lumina?
Yes, you can jump start the battery on a 1998 Chevy Lumina. To do so, connect the positive (+) terminal of the dead battery to the positive terminal of the working battery, then connect the negative (-) terminal of the working battery to a grounded metal surface on the Lumina. Make sure to follow safety precautions and ensure the vehicles are off before connecting the cables. Once connected, start the working vehicle and then attempt to start the Lumina.
Toyota Previa wont start?
There are a number of reasons why your Toyota Previa will not start. You should ensure that the battery is working properly, that the engine is able to pump fuel and if you cannot resolve the problem, you should call a mechanic.
Why does a ford F-250 1992 drain the battery when it is running?
Check the voltage in the battery with the engine off. Now, start the engine and watch the volt meter. The voltage should start climbing, if it does not, then the alternator is not working. Should read between 13.5 and 15.5 volts with the engine running at idle.
How do you jump start Jag XJR?
To jump-start a Jaguar XJR, first ensure you have a working set of jumper cables and a functioning vehicle with a charged battery. Connect the red cable to the positive terminal of the dead battery and the other end to the positive terminal of the working battery. Then, connect the black cable to the negative terminal of the working battery and the other end to an unpainted metal surface on the engine block of the XJR to prevent sparks. Start the working vehicle and allow it to charge the dead battery for a few minutes before attempting to start the XJR.
Why would radio stop working in a 2002 Ford Focus SE Wagon and then start working after loss of power and then with new battery start working?
Your computer reset itself.
How do you jump-start a jaguar?
To jump-start a Jaguar, first ensure that both vehicles are turned off. Connect the positive terminal of the dead battery to the positive terminal of the working battery using jumper cables. Then, connect the negative terminal of the working battery to a grounded metal surface on the Jaguar, avoiding the negative terminal of the dead battery to prevent sparks. Start the working vehicle, let it run for a few minutes, and then attempt to start the Jaguar.
Starter working fine. Why does my vehicle take a long time to start?
Battery
Why will a 1996 dodge trk not start with afully charged battery?
Is starter working?
What would be wrong if a sebring wont start or make any noise but it will start with a jump?
Either a discharged battery or a corroded battery terminal. The battery could be discharged because the alternator isn't working.
