theres a small set at auto zone for 12 dollars, i think its 10mm
You need a 8MM one.
10mm 12-point socket
6-point is a regular hexagon head bolt 12-point is for high torque applications where more contact is needed with the spanner or socket and for which a 12-point socket is needed. The head is in fact shaped like the inverse of a 12-point socket.
A 11/16 socket is needed to remove the 1984 Chevrolet pickup front axle hub assembly. The socket should be a five-point socket.
A twelve point 1/4 inch socket.
12 point 9/16 inch deep wall.
Switched Socket Outlet
You have to remove the cover for the third lite by poping the cover off using a small screw driver. Be carfull not to crack it because the plastic cover should be a little britle. At this point you will see the socket mounted inside the lens housing. Turn the socket clockwise for about a quarter of a turn and the light will come out with the socket. Replace the bulb, seat the socket, replace the cover and your done.
It is just called a 5 Point Socket or sometimes a Pentagon Socket and you can get them at online stores such as www.mytoolstore.com and Snap-On tools. It is just called a 5 Point Socket or sometimes a Pentagon Socket and you can get them at online stores such as www.mytoolstore.com and Snap-On tools. We in the electrical trade usually refer to these 5-sided sockets as "penta" sockets. "Eazypower" has a website where these can be purchased, and they refer to them as "Pentagon B-Box Socket".
There isn't a standard socket which matches up exactly. 1-15/32 or 1-1/2 inch MIGHT work for a six point socket.
The socket size for the axle shaft not, on a 2006 Chevrolet cobalt, is three-quarter inch. The socket should be a five-point socket.
Buy dual electrode plugs.If unsure of size when removed take one with you to parts store. All I needed to change my plugs was 12mm 3/8 drive socket.13/16 x 3/8 drive plug socket,10 inch 3/8 extension and 3/8 ratchet.Remove bolts from each of the two coil packs located on 2 cylinders closest to drivers side.All 4 plugs can now be accessed by pulling upwards on plug end of plug wires.Depends on how long since wires have been removed sometimes wires come apart on 2 plugs on passenger side.Not to bad to replace at this point. with plug socket,extension and ratchet remove old plugs and replace.I recommend using a little anti-seize lubricant on plug threads. Good Luck