7 MM.. You usually won't find it in a 'set' of Allen keys.. You will find it in a brake caliper set.. Try an auto supply store or similar.. I just picked one up for $7 Cdn at Princess Auto..
the caliper bolts require a 3/8" Allen wrench. You can buy these as a socket at just about any parts store.
It should be a 3/8" Allen wrench.
9mm hex (allen) wrench to remove two bolts for the front cailpers on a 2006 Escape.
The Allen wrench size for the front caliper slide pin bolts is 3/8".
I'm pretty sure that takes a 7mm Allen key.
A 3/8" Allen wrench is used to r&r the caliper bolts.
I don't know what size but on an 01 S60 you need an Allen wrench.
19mm deep socket for wheelnuts, 7mm Allen wrench to remove caliper bolts, 8" c clamp to push piston back into caliper housing
caliper bolts are the two bolts that hold a brake caliper to the caliper mounting bracket. On both the front and rear of the vehicle (unless has rear drum brakes) the bolts have rubber boots around them working as slide pins.
My girlfriend has a 2006 escape and I ran into the same problem trying to change her brakes and none of the Allen wrenches fitting. The '06 needed a 9 mm Allen, so I'm assuming the 05 would need the same?! Good Luck! ---------------------------------- I have a 2006 Tribute, 4wd, discs on front and back. I just did the brakes today. Front calipers are 9mm, back ones are 7mm.
the front calipers take a 9 mil Allen head and the rear take a 7 mil, noth arent in your average homeowner Allen set
The same way you replace the front. there both disc brakes all you do is take the caliper bolts out if there factory it'll be star head bolt ifs its aftermarkret they'll be Allen heads just remove the caliper and replace the brakes