It could be anything from 1970 to the end of production. That case number is the VW part number for a dual pressure relief engine case, and any VW engine with a dual-relief case (on the bottom of the case are these things that look like flat-tip screws with heads an inch and a half in diameter; if you unscrew one you will find a strong spring pressing up against a metal slug. If your oil pressure gets too high, the metal slug will compress the spring and allow the oil pressure to fall. If you have one screw you have a single-relief case; two screws for dual relief.) has a case with that part number.
chevy 350
size of motor
It's a 95-00 350.
what size motor
I have a generator that has a ford engine in it i want to find out what size of engine it is
what does the casting number GM 3892657 say about this engine block
Put the numbers in size order. The range is the biggest number minus/take away the smallest number. 123456789, in this case it is 8. GET IT?
double check the numbers... i think you'll find that the first number is a 3 3970010 and it is a 350 ci
To match those numbers to an engine you would need to go to a mechanic and have him look at it. From research though that should be a 3.0 litre toyota engine.
what is the size of motor of Fordf250 1996
All 1976 Corvettes were 350ci. The engine numbers will tell you if it's a base engine, L48 or L82.
The numbers on the drivers side rear of the engine right above the bellhousing are more helpful.