0
There are several choices- 10mm, 3/8". 13mm,1/2 " or 14mm, 9/16". I would shoot for the 13mm/ 1/2"
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What size bolt is it on the thermostat of a 1989 s10 blazer?
I just changed the thermostat on my 93 4.3 and the bolt is a metric size, unfortunately I don't remember what size it was, 12, 13, or 14 millimeter should cover it.
Where is the thermostat located on a 2000 Chevrolet Blazer?
You did not mention the engine size. Regardless, it is in the thermostat housing on the intake manifold.
Where is the Location of the thermostat 2000 jaguar s type?
thermostat is located between the rad and the engine under the throttle body inside the aluminum thermostat housing which has two screws holding is together and three medium size water hoses come out of the thermostat Housing.Undo the three clamps holding the three hoses to the housing then the thermostat housing will come out,then unscrew the two screws holding the thermostat housing together then you will find the thermostat.
What is the bolt size - socket size - on the thermostat housing on 2000 Chevy Cavalier 2.2L?
8mm is the socket size. Try and find a 6 point socket if you can, instead of a 12 point. Those little boogers round off very easily. I'm surprised GM didn't engineer a larger, stronger bolt for that application.
Where is the thermostat located on a 1998 Ford F-150?
You don't say what size motor you have, but a general rule of thumb is to follow the upper rad hose to the motor and it is connected to the thermostat housing. Remove the housing and the thermostat is under it. CT
What is the bolt size of the wheels of Fiat Punto?
The heads take a 19mm socket
Torx size for thermostat housing on 97 Volvo 850?
It is a T40. To remove the housing you first have to remove the power steering pump.
Location of thermostat housing on Nissan Sentra?
follow the top hose leading you from your radiator to your engine you should see a silver clamp holding the hose to what we call the housing , the housing has two screws with nuts on them use the right socket size to remove to change your thermostat which sits inside the housing
What size wrench removes the housing around the thermostat?
The one that fits correctly. Stupid questions get stupid answers
What torx size for the brake calipur?
what size torx bolt holds the rear parking brake housing on the 2005 chrysler pacifica
What size is motormount bolt on small block Chevy?
3/8" if 9/16 socket heads.
How to change thermostat on 2000 Honda Civic?
First locate the lower radiator hose, that hose should lead you to the thermostat housing (just behind the motor and to the left). This hose should be the same size as the top radiator hose. Second you move the clamp (pliers will work) down the hose away from the thermostat housing, then loosen that hose from the thermostat housing. Third you take of the 2 Bolts off from the thermostat housing, they should be 10mm. Remove the thermostat. When you replace the thermostat you may also need to replace the gasket. Simply put the bolts back in and tighten them, then reattach the lower radiator hose and move the clamp back to its original position. Note: The top radiator hose does NOT lead you to the thermostat housing!
