the bolts holding the distributor cap is a 7mm
They will bolt up.They will bolt up.
Yes, there is a bolt and a plate that holds the distributor down.
That's not a fuel thing, it is your electronic ignition. Your distributor bolt is under the distributor, if you're standing on the right side (passenger,) it's hard to see under there, but it's there. If you look closely you will see a fork like plate under the distributor the bolt is to the out side of it. The bolt is 1/2 in, you need a distributor wrench.
No. The bolt pattern is different.
5-51/2
YES, However, the heads are different on the 1996. they are the most sought after Vortex heads..everything will bolt right up and run great.
You CAN, they were both options, but be aware that the 10-bolt isn't as strong.
It is a tight fit, but you can get to them from the top if you remove the distributor first.
If both 4wd, they will bolt up fine. If the 1996 is 2wd the 2005 rims will not clear the hub/bearing and will not work.
It will bolt in, but it will not work. The 1995 uses a hydraulic governor. The 1996 uses an electronic governor.
no heads and intake are different form a 360 to a 318
It will bolt up, but the internal sensors are wired differently. So it will not shift.