Not sure exactly on the 88 model but,will tell you my 87 has 3/16 inch metal hardlines.I will tell you if you are wanting to replace the actual hoses on the front or the one rubber hose for the rear auto zone,advance auto carry those.You can go to there webpages enter your trucks specs and do a search and find it with ease.The hardlines I recommend going to napa they sell various sizes and lengths and if you need the hardline(metal) buy a brake line bender tool.Napa sells solid stuff on this and very inexpensive!! The tool is between 25.00-30.00 to my recollection.Hope this help.
If there is no brake lights on a 1998 Mazda pickup, check the fuse. If the fuse has blown, the lights will not work.
use brake fluid
How to Install Front Brake Pads Check Related links below.
DOT 3 Brake Fluid
I assume you are asking about the brake pedal. Might be due to low/no brake fluid in the reservoir, air in the brake line, possible leak in the brake line, or the master cylinder may not be working properly,
change stop brake light under foot pedal check fuses first
The Rear ABS speed sensor is installed into the top area of the rear differential.
You do not need tape on any flared fitting, brake or regular. The brake line and the fittings are different size and thread type than regular copper line and fittings. You can't mix them.
how do change brake pads on a 2002 dodge pickup 4x4
1/4 inch line, 3/8ths fittings.
how do remove the brake drum on a 1991 mazda 323
Brake fluid location in 1992 Mazda mpv