Want this question answered?
5.25"
unscrew speakers cut of connector connect wires to speakers screw speakers in replace cover done
The same way you would on the drivers side....
The speaker wires have 2 pin connectors that connect to the coaxial speakers in the doors.. If looking to upgrade speakers make sure you do research on the physical size of the new speaker as there might be issues. Also you can pick up a wire harness to connect the factory wire harness that is mounted to the door to a new set of speakers.
No. You buy a waring harness and connect it to the car wiring and the amp to the speakers there behind the radio.
My 2009 spectra has 6.5" door speakers. On a semi related note, there's a lot of rattling coming from the right one. I'm gonna replace them soon with kicker speakers and make sure they're mounted correctly.
The door speakers are 5.25 inches but you have to purchase an insert in order to replace the door speakers.
door speakers are 6.5" and rear deck speakers are 6"x9" door speakers are 6.5" and rear deck speakers are 6"x9"
front 6x9, rear 6.5
the front door and back door speakers are 6" x 8 " speakers
If the speakers are in the door panel then you must remove the door panel to install new speakers. You can only bypass removing the door panel if the speakers are located elsewhere.
The GMC stereo has amplified rear door speakers. When wiring up the aftermarket stereo, connect the blue wire on a GM aftermarket harness to acc power and the speakers will work. I did the same thing for mine about 5 years ago. Good Luck...