Sewing by hand, I would use a Sharps Size 8
Dufferin did not always use the same thread as a standard but it should be a 3/8 - 10.
Beading thread is usually finer (thinner) and stronger than sewing thread. There are so many different kinds of sewing thread, it's hard to answer your question. Using the correct thread for the project is important in you want your work to last. You can get a sense of pride for a job well done.
One-piece cranks use 1/2" thread
One-piece cranks use 1/2" thread
Well from personal experiences I use wire for when Im using heavy beads or many beads that can make the necklace or braclet heavy. I use fishing string for light weight projects. Also remember that the crimp bead can also cut string so be carefull, if you don't pull it could fall apart while putting it on or wearing it. Bead on, good luck. SELAH!!!
Use a long stitch, with heavy thread, and a 16 or 18 size needle. That should do it!
14m
it is best to use the right size of philip screwdriver because this will prevent the screw to be from loosen its thread.
In many instances you can use a regular cross stitch pattern for your initials, so long as the letter is all full stitches. Use half stitches to anchor each bead into the Aida, running in horizontal rows, L to R. Be certain to use a neutral color thread to anchor each bead. You may outline it in a corresponding color to the beads.
Pandora beads are on a screw-thread with a screw-thread on the end of the bracelet. To remove beads you "unscrew" the bead as though you were unscrewing a nut. Be careful adding other brand beads to a Pandora bracelet. If you damage the bracelet or the threads it is not covered under Pandora's warranty.
A small needle, size 60/8, is suitable for sewing silk.