9006 for the low beam, 9005 for the high beam
9006 low beam, 9005 high beam
You should specify which bulb. As is, we don't know if you're talking about headlights, tail lights, or any other number of bulbs that vehicle requires.
Low beam is a 9006 bulb, high beam is a 9005.
It is called a socket.
9006 for the low beam 9005 for the high beam
bad ground or bad terminal connection!
Icluding aftermarket headlights??
Unplug the whole light assembly from the bottom front of the car it just pops out to replace the turn signal bulb-same on the rear but you have to remove the trunk lining first.
See sources and related links below for the 2002 Mitsubishi Lancer headlight bulb info.
open the hood behind the headlights there should be two white retaining clips holding the headlight in place. remove the clips and carefully pull the headlight remove the black rubber cover twist the socket and pull out the socket with the lightbulb pull out the bad bulb. before installing the new bulb DO NOT PUT YOUR FINGERS ON THE NEW BULB DUE TO THE OIL ON YOUR FINGERS WILL CAUSE THE NEW BULB THE BURN OUT JUST AS QUICK!!!!!!! then reverse the procedure.
lift hood,on top of the headlights are tabs to pull up.pull the tabs up and pull the headlight towards you and it will make the bulb holders visible
Hmmmm... The first response is which bulb?Gotcha covered with the related questions below, from headlights to tail lights to high-mount brakes lights...