Want this question answered?
It should say on the compressor and the fan motor labels.
Typically a bad capacitor is a sign of a weakening Compressor in the unit. Rule of thumb: If the unit is 20+ years old, you would be putting a band aid on it by replacing the capacitor. If you decide to try and get by with an older system for a few more seasons, I recommend to put a new capacitor on the unit with a hard start system installed on the compressor. You can normally have this done for under $300.00. And back to your question; capacitors are sized depending on the size of the unit. Check your tonage of the unit and bring the capacitor with the correct tonage to a Parts house and they will make sure it is properly sized. Hope this helps.
near the compressor on the wall of the cooling condenser
3100y20q800cl
The compressor capacitor probably is going bad, or maybe the compressor will need a start capacitor and a potential relay.
You would do better looking on the compressor name tag than relying on an answer you`d get here.
the capacitor starts the compressor generally if it don t work the compressor usually won t start
Bad fan motor or bad capacitor.
Check to see if the capacitor is good. It is usually located inside the outdoor unit. It could be that the capacitor is bad and needs replacing. The outdoor fan will still run if you have a dual capacitor. One sure sign of a blown capacitor is that the top of the capacitor is bowed outward. If you have a multimeter you could also check the amp draw on the condensing unit. I would look at the capacitor first though
No.
Check your outside unit. Is the fan blowing? If not replace outdoor fan motor or the fan capacitor. If the fan is running then the compressor may not be. Usually a quick fix by replacing the capacitor. In most units a dual capacitor that is bad may shut down the fan or compressor. Call a HVAC technician to replace it. This can be very dangerous.
Capacitors are measured in Farads or microfarads.