It is 3/8". Still the same on my '95 Z-71 and my '99 Tahoe Z-71
3/8 inch
it could be the brake light switch that usually contacts the break pedal when you depress the brake pedal. check that out first.
What size alien wrench need to take off brake caliper 1996 Buick le sabra
10mm
Remove wheel, remove the bolt holding brake hose to the caliper, remove the two pins that hold the caliper to the caliper bracket using a 3/8" allen wrench, remove caliper. Inspect brake pads and brake hose for damage, replace if necessary. Install new brake caliper in reverse order. Bleed system.
55 ft. lbs.
The 1996 Chevrolet Camaro parking brake has an adjustment bolt on the parking brake. Turn the adjustment bolt to adjust the brake.
I have used a large "C" clamp, to compress the caliper flush to the face.
Failed caliper or brake hose.
do you have TBI ?
9 to 13 PSI.
rear brakes on the 1996 ford thunder bird caliper is a screw caliper . yes or no...