0
What else can I help you with?
How do you remove trimmer head on homelite trimmer when the motor head turns when i try to unscrew head?
To remove the trimmer head from a Homelite trimmer when the motor head turns, you can use a piece of wood or a wrench to hold the motor shaft in place. Insert the wood or wrench against the shaft to prevent it from rotating while you unscrew the trimmer head counterclockwise. If the trimmer has a locking mechanism or a specific tool for this purpose, consult the user manual for detailed instructions. Always ensure the trimmer is turned off and unplugged before attempting to remove the head.
How many quarts of motor oil are included in a typical Jiffy Lube oil change service?
Typically 5 quarts are covered in the service.
What type of motor is used in a trimmer?
Engine, not motor. It'll typically be a two stroke engine with one or two cylinders.
How much trimmer line should be used for optimal performance?
For optimal performance, use the recommended amount of trimmer line as specified in the user manual or by the manufacturer. Using the correct amount ensures efficient cutting and prevents strain on the trimmer motor.
What are the key features and benefits of the Kobalt string trimmer?
The key features of the Kobalt string trimmer include a powerful motor, adjustable cutting width, and a lightweight design. The benefits of this trimmer are its ease of use, precision trimming, and long-lasting battery life.
Can I use hedge trimmers to cut through vines?
Yes, you can use hedge trimmers to cut through vines, especially if they are relatively thin and manageable. However, be cautious with thicker or tougher vines, as they may damage the blades or strain the trimmer's motor. For larger or tougher vines, it's better to use pruning shears or a different cutting tool designed for heavier vegetation. Always ensure your trimmers are sharp and in good condition for the best results.
How do you build rechargeable fan?
I take my old trimmer and open it. Then I remove its upper portion and attach a long strip of cardboard on the upper side of its motor and switch on the trimmer. My rechargeable battery fan was prepared.
Where does the ground earth wire go once it is connected to the motor on a two stroke trimmer motor?
On a hand-held machine like a strimmer the earth wire is there to ensure that all the metal parts of the strimmer - that could be touched - are connected together and therefore are all at the same voltage, to avoid electric shocks.Another AnswerNot sure why a 'two-stroke' trimmer motor would require an earth wire as it would not require an electricity supply.
What is a typical day like with Valintino Rossi?
Motor cycling
What is the typical useful life of an AC motor?
10 years
How do you sharpen electric hedge trimmers?
I have been sharpening my electric hedge trimmer for the 32 years I've owned it. It sees a lot of use trimming many shrubs and a 125 foot long privet hedge.Use a die grinder or a Dremel-type rotary tool with a small diameter grinding wheel. I use a 1/4" wheel.Move the motor shaft using a small screwdriver through the ventilation slots and turn the fan. Rotate the motor until the blades are in a position where you can sharpen one edge of all blades. The trimmer can be held in a bench vise padded with a rag to make this a one-person job. Hold your grinding wheel to maintain the factory ground angle on the blades. If you sharpen your trimmer every few years, you don't need to grind very long to get the blade sharp. After you finish one side, rotate the motor shaft to move the blade to the opposite position and sharpen the other side of the teeth.
How many watts is a typical remote control car motor?
about 69
