0
What else can I help you with?
Can a person make a motorised ice auger using a homelite gas trimmer motor and the auger from a hand powered ice auger?
Yes, it is possible to make a motorized ice auger using a Homelite gas trimmer motor and the auger from a hand-powered ice auger. You would need to adapt the motor to fit the auger and ensure that the motor has enough power to turn the auger effectively through the ice. It may require some engineering and modifications, but it can be done with the right skills and tools.
How do you remove the air filter on a Craftsman Lawn Tractor?
The pastic case on left side of motor. Unscrew nut, remove cover. Unscrew the second nut. You have it.
How do you remove the oil pan on a 2001 ford mustang with 3.8 motor?
You need to unscrew the screws and remove the lid to remove the oil pan on a 2001 Ford Mustang with 3.8 motor.
How do you replace a window motor and regulator on a Nissan Maxima?
remove plastic moulding around door handle and door lock. unscrew door handle and unsnap plastic anchors around lower portion of door unscrew door panel from door. lift up on panel and remove. remove plastic. unscrew motor from door , let window down and remove two screws holding window. remove motor and metal bar replace and reverse process. 1991 Nissan maxima
How do you build rechargeable fan?
I take my old trimmer and open it. Then I remove its upper portion and attach a long strip of cardboard on the upper side of its motor and switch on the trimmer. My rechargeable battery fan was prepared.
What make is the motor on the baja warior mini bike?
Homelite
how do you remove pulley from motor on a roper dryer?
You have to unscrew the hex nut that is attaching the pulley to the motor. It can be relatively difficult so get a torque wrench.
Where is oil filter located on a 2011 Dodge Durango?
On the 3.6L engine it is on the top of the motor. You remove a access panel and unscrew the oil filter cup. The filter is a paper element under neath.On the 3.6L engine it is on the top of the motor. You remove a access panel and unscrew the oil filter cup. The filter is a paper element under neath.
What size motor does the homelite 450 chain saw have?
4.5 cu in or 74cc
How do you remove Magnetek Centurion Switchless motor?
First be sure to throw the breaker to cut off the electricity to the motor. At the back of the motor there is a plate secured with screws. Remove the screws and expose the terminals. Unscrew the terminal screws and remove the wires including the ground wire. You should now be able to pull the wires out through the casing and remove the motor.
What size motor is included on a typical gas hedge trimmer?
The most common size motor in a gas hedge trimmer is a 25 cc motor. More and more of them are being made with 26-27 cc motors.
What size motor does the homelite 360 have in it?
Engine displacement: 3.5 cu. in. (57 cc)
