Displacement doesn't translate to horsepower. You gave us no idea what the original engine is (gas, diesel, marine, highway, off-road, etc), you gave us no information about the application, and you gave us no idea whether you were looking for matching specs or to upgrade.
The 90 Corvette had a 350 c.i. engine
Need to know engine size.
You gotta get under the car and do it from the back of the engine.
The 90 hp Johnson outboard is not shipped with a propeller installed. The correct size is determined, and installed, when the engine is rigged on the boat.
My '90 Eldorado has a 4.5L port injection in it
you need around 60000 watts on a dc current
yep that engine there is compatible with all lincolns from 90-97
you may have a crackd head or a cracked block
look at the motor it should have the size stamped on it it could be a 70 90 110 125 185s 200s 200m
The stock jet size for the Predator 90 engine is typically around a 90 main jet. However, jet sizes can vary based on altitude, temperature, and specific tuning needs. It's advisable to consult the engine's manual or a knowledgeable source for specific recommendations tailored to your setup.
To remove/replace the engine on a mid-90's G series van, you must remove everything in front of the engine, from grill to radiator, and remove it from the front. You may need to remove the motor mount to crossmember bolts to allow the engine to move forward. It is best to keep the transmission bolted to the engine, as it will be easier to align, etc when you are ready to reinstall it. Keep in mind all the lines and wires will need to be disconnected, too. Get a Chilton bok and use it for reference.
theres lots of type of engine u can fit into a 90 integra, sum will direct fit such as all the B series motor that comes with the integra, other u have modifity to fit such as the H22 motor from the Honda prelude or a K20 motor from a RSX