Want this question answered?
It depends on the motor size. If 750 watts, then, 750/240 = 3.125. So use the next size up - 5A fuse
The size fuse should be noted on the old fuse.
Another 750 mA fuse. 750 mA is equal to .75 amps. The max I would put in is a 1 amp fuse and I would want to replace it soon with the proper one.
The size and composition of fuse wire is designed to "burn through" in an over current situation. That works fine as long as the current is lower than the fused rating. If you were to use the wire in the circuit then all your wire would essentially disintegrate in an over current situation.
:-P
The chain size is 530. it was an O-ring from the factory.
well it might give you a clue, i would suggest a 5 ampere fuse for that 5 amp plug
i know it is a size 15 fuse. i believe it is the 6th slot down on the left side. it would be the fifth fuse down as there is an unused slot. for me that is. 1997 Nissan maxima v6 manual. mine continually goes out
You might check the Amps size of the fuse. A lot of times, if you are using a fuse with too little Ampage, it can cause the fuse to blow. Your owner's manual should tell the proper size of fuse for that specific circuit.
chain size is 630 pitch, o-ring style chain recommended
The Fuse size is listed on the under side of the Fuse Cover.
the size of chain on the 1981 kz650 is a 530 or 630 chain. that is a pretty good chain in my opinion because it is very strong and it is pretty thick.