Want this question answered?
Remove the tire and wheel from your 1999 Mercury Cougar. Remove the axle end. Remove the wheel bearing retaining nuts. Remove the wheel seal and the wheel bearing. Reverse the process to install your new wheel bearing.
30mm
With the correct sized socket, obviously.
Try a 30mm socket.
It requires a 1 and 11/16 inch socket to remove.
Remove the wheel, axle and drop the exhaust and pull it out. It sounds so easy..... It took me almost 7 hours!!!
Locking axle nuts are torqued down at more than 150 foot pounds. It is recommended?æto use either a breaker bar or an impact wrench. Spray a lubricate to get rid of?æany rust, then use a breaker bar to break loose the nut.
1 and 11/16 inch
it's 36 mm Deep socket six point
what size socket for front axle nut 1991 ford tempo
what size socket 92 ford tempo front axle
The front axle nut on the 4+4 should be 35mm. You can use a 1 3/8" deep socket but it will fit tight. On my 2000 Chevy s-10 the Nut was 36MM. The socket I bought at advanced auto says right on the package for GM axle nuts.