answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What size socket to remove axle nut on front gmc Yukon Denali 4x4?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the front differential gear oil for a 2001 Yukon Denali?

Use an 80-90wt gear oil


Can you drive your 2001 Yukon Denali without your front differential without breaking anything?

they cannot or the clutches will burn out


How do you lower a Yukon Denali?

Get lowered spindles for the front and lowered springs for the rear. Try jegs.com or jc Whitney


Where is the oil filter on a 2007 Yukon Denali?

The oil filter is on the bottom of the engine just in front of the transmission almost exactly in the middle of the bottom side of the vehicle.


What socket size is needed to remove the front hub nut from a Peugeot 306?

You will need a 35 mm socket.


What size Torx is needed to remove front brake caliper on 05 Yukon XL?

T55


What socket is needed for the front axle nut for the hub assembly on a 1984 Chevy pickup?

A 11/16 socket is needed to remove the 1984 Chevrolet pickup front axle hub assembly. The socket should be a five-point socket.


What size socket to remove axle nut on front gmc sierra 4x4?

36mm


How do you replace the front turn signal bulb located on a 1997 Pontiac Sunfire GT?

Remove the front inner wheel well splash shield. Grasp the bulb socket and rotate it counter-clockwise to remove it from the lamp. Remove the bulb from the socket. Installation is the reverse of removal.


What is the wrench size to take off the front brake pads of a 2000 Saturn LS?

to remove the front brakes you need a 7mm hex socket and a 10 mm hex socket


How do you remove the starter on a Chrysler Pacifica?

Remove the front exhaust manifold and remove the starter from the top.Pull the front exhast manifold and dipstick remove the 3 bolts with a 15mm socket or wrench pull the starter from the top


How do i remove the front speakers in a 1992 cutlass cierra s?

pull out the speaker covers, get a 7mm socket, & remove the 2 screws..