5x7 in rear 5.25" in front
6 in. X 8 in.
2000 for f250 has a 16 inch wheel
Before 1999, F250s used 16" wheels with an 8x6.5 lug pattern.
20
wrench for lug nuts on f250 is 7/8s of an inch there is a metric wrench that fits but i cant remember what size it is
to remove spare wheel on 2001 f250, you will need the key that fits the crank on the spare wheel carrier the key fits the end of the jack handle and then fits into the wheel carrier to allow the lowering of the wheel if you do not have the key you can purchase a replacement from "McGard,Inc"(1-800-444-5847). you will need VIN number from truck to order new key and the key will cost about $25-00 there are several hundred different variations on the key, i have access to about 8 ford trucks and not one key would interchange with others
Any place that sells batteries will have a chart listing the correct size for your Ford.
I used 6x8 in my Explorer XLT. Pioneer makes a model 6870R that fits perfectly.Answer6X8
Straitjacket Fits ended in 1994.
The PCV on a 1994 Mustang 302 is located on the rear of the lower intake plenum. It fits into a rubber grommet and has a right-angle hose leading off of it.
You should have a rubber plug that the hose fits into. Go to ford and buy a new one.
4"