The 1996 Oldsmobile Achieva takes 19" replacement windshield wipers on both sides front.
To remove the windshield wiper arms from a 1996 Oldsmobile Achieva, first, lift the wipers away from the windshield. Then, locate the small plastic covers at the base of each wiper arm and gently pry them off to expose the mounting nuts. Use a socket wrench to remove the nuts, and then carefully wiggle and pull the wiper arms straight off the splined shafts. Make sure to do this with the arms in the upright position for easier access.
What are the torque specificatons for a 1996 v6 3.1 head on an oldsmobile achieva
All 1996-2000 Plymouth Voyagers take 28" replacement windshield wiper blades on both sides front.
I have a 1997 Oldsmobile Achieva. I use the schematics in the Haynes manual I bought for my vehicle. There are several wiring diagrams in the manual, so you have to match your vehicle to the appropriate diagram.
The 1996 Ford Windstar takes 24" drivers side, 20" passenger side and 16" rear replacement windshield wiper blades.
The 1996-2000 Dodge Caravan and Grand Caravan takes 28" replacement windshield wiper blades on both sides front and an 18" rear replacement wiper blade.
The 1996-2000 Honda Civic takes 20" driver side and 18" passenger side replacement windshield wiper blades and if applicable, a 14" rear wiper blade.
The 1996 Oldsmobile Cutlass Supreme has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
The 1980-1996 Ford F-Series Pickup takes 18" replacement wiper blades on both sides front.
Could be he wiper motter or the fuse.
check main pulley area bottom by harmonic balance
did u ever figure it out?