Want this question answered?
21mm socket or wrench
7/8
14mm
An impact wrench works good.
The filler plug is on the front of the transaxel housing. It's the largest bolt there. access it from under the car. It's right behind the elbow in the lower radiator hose. You'll need an adjustable wrench or a 30mm socket. Be sure not to over-tighten it when you're putting it back into the transaxel housing.
Its a 10mm Allen Key.
The automatic transmission drain plug for most Toyota vehicles is a 10x1.5 thread size, with a head (hex) size of 14mm. You can use a 14mm open end wrench, or a 14mm hex socket, whichever is easier.
According to professionals, you need to change at least 2.6 quarts of transmission fluid in a 1991 Toyota Land Cruiser. You will need a 3/8 socket wrench to remove the transmission fluid plug.
In order to remove the oil filter from a 2007 Toyota RAV4 you need to use an oil filter wrench. This wrench is a specialty to Toyota.
The transmission filler plug on all Twin Cam models is located on the transmission end cover (that's the oval-shaped cover on the right side of the bike where the clutch cable terminates) toward the front of the cover. It has a hex-shaped hole in it where the Allen wrench goes.
There is no Allen wrench, I believe it is 14 mm open wrench.
Underneath the vehicle - the manual transaxle check/fill plug is located on the passenger's side (U.S.) of the transaxle. Use a box end wrench to remove/replace it.