0
What size wrench is needed to remove the caliper bolts on the front brakes of a 99 Pontiac sunfire?
Wiki User
∙ 15y ago
You need a 3/8" allan key or hex socket - not a torx
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What parts are needed to replace the rear drum brakes on a 1997 Pontiac sunfire?
The only part that is needed to replace your 1997 Pontiac rear brakes is a break assembly kit. The brake assembly kit will have everything you need.
What size wrench is needed to remove the caliper bolts on the front brakes of a 2000 Pontiac sunfire?
Try a 3/8" hex socket or a 9mm hex socket. The latter may be hard to find as they are usually dealer specialty tools. The 3/8" hex should work fine as long as the bolt heads are not rusted badly. Be careful not to strip the hex heads on the caliper. I found out the hard way.
How do you change rear disk brakes on a 2006 Pontiac G6?
pop the wheels off, un-do the 2 x caliper bolts take caliper off take springs and shims off the original break pads as they might be needed for the new set.. refit and done
How many quarts of oil are needed after new filter for a 1999 Pontiac Sunfire?
4.5 quarts
How many quarts of oil are needed after new filter for a 2005 Pontiac sunfire?
4.5-5
What parts are needed to replace brakes on 1996 Pontiac Sunfire?
I'd suggest picking up a Haynes or Chilton manual for your car. It will take you through the procedures and will let you know what you need, if you read the procedure before you begin the job.
What tools are needed to change brakes on a 2001 Pontiac Sunfire?
Probably basic hand tools and perhaps a brake spring tool. If you pick up a shop manual for the car and read their directions, you should get some idea what you'll need.
What type of antifreeze does a 1996 Pontiac sunfire use?
A 1996 Pontiac Sunfire uses Dexcool coolant. This should only be mixed with distilled water, never tap water. Replace the coolant every 2 years or as needed.
What size wrench is needed to remove brake caliper bolt 2005 Pontiac vibe?
My girlfriend has a 2006 escape and I ran into the same problem trying to change her brakes and none of the Allen wrenches fitting. The '06 needed a 9 mm Allen, so I'm assuming the 05 would need the same?! Good Luck! ---------------------------------- I have a 2006 Tribute, 4wd, discs on front and back. I just did the brakes today. Front calipers are 9mm, back ones are 7mm.
How many quarts of oil are needed in a 2004 Pontiac sunfire with a ecotec 2.2 engine?
5 quartz or 4.8 liters.
What Tools are needed to replace brakes 96 Grand am?
To replace the brake pads on a 96 Grand Am, three tools will be needed. First, a C-Clamp, then a hex key to remove the caliper bolts, and a screwdriver to work the caliper free.
What Size Allen Wrench is needed remove the front caliper bolts on a 1992 Pontiac grand prix?
t-60
