Want this question answered?
I needed a Hex 9MM worked great
To remove the spare tire on a Mercury Mariner insert the jack handle into the hole provided on the rear bumper of the vehicle. Turn the jack handle clockwise to lower the spare from underneath the vehicle.
I believe it's either a 40 or 45.
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
First,disconnect the battery.Remove tire.Set jack stands on frame not control arm you will be removing the steering knuckle for this job.Remove inner fender well.Remove brake caliper,brake caliper mounting bracket,rotor,remove lower balljoint nut,remove knuckle to strut bolts,remove abs sensor from knuckle,seep rate knuckle from lower balljoint
Remove the two slider screws that hold it in place.
well u need a 15 mm socket and a t40 star wrench.take off the two star bolts on the back of the caliper then pull caliper off and then take the two 15mm bolts of the back of the braket and then pull of rotor reverse to put back on.
Remove the tire and wheel from your 1994 Mercury Cougar. Remove the brake spring and brake caliper. The brake shoes will come off.
first remove tires from vehicle then remove calipers then you can replace break pads on both sides of vehicle
It will be necessary to remove the front license plate and bracket. Remove license plate from bracket. Using a 3/16" drill bit, drill out the two pop rivets that hold the bracket to the bumper. This is from a a bull bar installation guide for a 2008 Ford Escape/2008 Mercury Mariner.
45t
You will need a hex key to remove the brake caliper on an '05 Navigator. There will be two bolts that need to be taken off with the hex key.