0
A typical riding mower with a 38" deck probably comes with a 12.5HP motor. If your mowing requires cutting higher grass or big hills you may want to have one with a larger engine more like a 16.5HP.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is a good sentence with the word rotary?
A rotary mower is a good mower for a medium sized garden.
How do you choose circuit breaker all the control circuit if i have 50kw power of motor?
The breaker should be sized to 250% of the motor's full load amperage.
What is an average sized horse's weight?
About 1000 to 1200 pounds for an average riding horse.
Can you legally drive a lawnmower on the road in Maryland?
Yes, it is a vehicle and as long as it does above 10 mph , you should be fine.Another View: A standard sized riding lawnmower is NOT considered a "vehicle," it is a "self-powered lawn implement" and may not be legally operated on the public roadway as a method of transportation from point to point.
Where is the heater fan resistors located in a Pontiac?
should be close to the blower motor is a good sized plug with 4 or 5 wires tnvrr
What is the best bike for a novice?
One suitable for the preferred riding style and appropriately sized for the rider.
What will cause a motor to go into a locked rotor state?
The only time a motor should go into a locked rotor condition is if the motors connected load jams causing the motor to stop turning. At this point if the motor control circuitry is sized to the motor's full load amperage, the high rise in current will trip the motor off line.
Are motor conductors sized to the locked rotor current?
According to 2011 nfpa 70 nec Motor conductors are sized with the flc- full load current or the nameplate rating fla- full load amperes
What is the difference between a mustang and a shelby mustang?
A Shelby mustang has a larger sized motor and the original ford mustang has a smaller motor.
What kind of bike was big black riding on rob and big?
SE Bikes.com , they built him a custom sized PK Ripper
How big of a breaker for a 26 amp motor?
Sizing circuit breakers for motors falls into a different category. Because of the inrush of current when the motor is in the stopped position, the breaker has to be sized to allow for this. Breakers usually are 250% of the nameplate full load amp rating. The wires that feed the motor are sized to 125% of the full load amps of the motor.
Are fuse sized for three phase motor two times the nameplate rating?
Not normally. They are sized slightly above the LRA ( locked rotor amps) or the FLA (full load amps) stated on the motor nameplate. The startup current of a motor can be 125-150% of the running load amperage. This depends on the motor, its EFF (efficiency) and the torque requirement of the load.
