3.0 GHz Pentium 4s were manufactured for both Socket 478 and LGA775.
It is not size, it is the configuration.
A processor is made for a certain socket. The placement of the pins allows it only to be placed in the socket it was designed for.
Socket LGA775
I7 Processors use socket LGA775.
"Socket" is what you call the frame the processor is seated on. There's "socket A processors" for example, maybe that is what you mean. They perform the same task as any other processor, they just happen to fit on a normed socket called "socket A". A socket has no processor of its own, it just connects the CPU to the motherboard.
Socket 8
An AM2 Socket is a type of socket used by a Processor on a motherboard. These are AMD processors, as indicated by the "AM". When you buy a motherboard and processor you must make sure that they have the same socket and that your motherboard supports the processor you have chosen. For more info: http://en.wikipedia.org/wiki/Socket_AM2
Socket 478 was the only widespread name for this processor socket.
The processor socket is both a technical convention and functional component. As a convention Socket # such as 775 and 1150 regard motherboard chip type compatibility. The functional aspects of the socket serve as the electrical interface between the motherboard (and its peripherals) to the processor itself.
Because the pins on the bottom of the processor can be easily bent (assuming that this is a processor for a PGA (Pin Grid Array) or SPGA (Staggerd PGA) socket. It is worth noting though that a processor for a LGA (Land Grid Array) socket is not as susceptible to this as the there are lands or pads on the bottom of the processor instead of pins; the pins are in the socket. The book that asks this question assumes PGA. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Very true BUT you can bend the lands in an LGA socket, rendering the socket hence the motherboard useless!
Depends on what processor you're using. Go to the manufacturer's site and find the product, it should tell you the socket that the processor requires. Any motherboard with that socket will be compatible
The lever doesn't lift the processor out of the socket; it takes the shearing force off of the processor pins inside of the holes, so that the processor can be lifted out, or inserted, with no pressure necessary. When you lower the lever on a ZIF socket, the pins are clamped down on under the socket plastic housing.
Because the pins or lands on the CPU or the CPU Socket are easily bent
Many processors will not work on a Socket 7 motherboard. Providing a full list of every processor that is notcompatible with a Socket 7 board would be impossible.
processor must be compatible with socket on motherboard