whichever size fits tightly, probably a metric 15mm
Should be at the bottom of the radiator logically...
12mm if I'm not mistaken
You can, or a wrench.You can, or a wrench.
If the drain plug is original equipment, it takes a 17mm wrench or socket.
The socket size for the axle shaft not, on a 2006 Chevrolet cobalt, is three-quarter inch. The socket should be a five-point socket.
If I remember correctly it is 15. Thanks, Wes
once you remove the retaining tabs off of the washer that are covering the nuts, it takes a 34MM DEEP SOCKET
It is located on the passenger side, just inside the tire. It is on the back side of the drain pan, as opposed to the bottom of the pan.
56-62 psi
The automatic does not have one. The pan has to be removed to drain the fluid. The manual should have a drain plug on the bottom.The automatic does not have one. The pan has to be removed to drain the fluid. The manual should have a drain plug on the bottom.
the oil drain plug is located on the back side of the engine. look for a metallica/grey oil pan that is facing towards the rear of the car,locate the bolt that uses a 5/8ths inch socket/ratchet. turn counter clockwise and you should be good to go
where is oil filter for 2006 Pontiac pursuit