"Main sockets" is referring to fuse sockets, particularly the main fuse sockets for a fuse panel.
no
Yes, they are.
Maxilla
I have 5 fingers
Sticking Fingers into Sockets was created on 2007-07-03.
no it just gives you arthritest and the clicking is air sockets popping in between your bones
"Main sockets" is referring to fuse sockets, particularly the main fuse sockets for a fuse panel.
fixtures that use double-ended lamps have two sockets usually porcelein one or both of the sockets are "spring-loaded" push into one of the sockets along the axis of the lamp and see if you feel spring tension. If not, push the other way. You may have to push hard against the spring until there is enough of a gap at the other end for the lamp end to tip out. For this reason you should wear leather gloves in case the lamp breaks in your fingers. Remember not to touch the new lamp with your bare fingers because the oil from your skin will damaged the lamp glass when it heats up
Wrenches and sockets all come in multiple sizes. Which you have depends on the kind of work you do. Most craftsmen have a full set of metric wrenches and sockets and a full set of SAE wrenches and sockets. Most get by with 3/8 drive sockets, but many have 1/2 sockets as well.
Dried Grapes were used to plug the sockets.
They shouldn't, so no.
Dried Grapes were used to plug the sockets.
Dried Grapes were used to plug the sockets.
[Debit] Extension sockets expense [Credit] Cash
Dead short to ground in either: Parking lights or sockets Tail lights or sockets Dash lights or sockets
Metric 6 point sockets are the most commonly used sockets today. American made vehicle used to only have standard bolt, but today they are being replaced by metric bolts like all other manufacturers.