answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What sprinkler design criteria is acceptable for an Ordinary Hazard 2 horse stable?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the sprinkler spacing for ordinary hazard group 2?

130 suare feet


What are the automatic sprinkler requirements for an ordinary-hazard group 1 occupancy?

Ordinary Hazard Group 1 density is 0.15 gpm/sq ft over 1500 sq ft if wet pipe system Ordinary Hazard Group II density is 0.20 gpm/sq ft over 1500 sq ft if wet pipe system (according to NFPA 13) There are factors that can change the density and area requirements depending on variou sfactors, but in general the above densities/area are correct.


What is the area per head limitation for a extended coverage ordinary hazard sprinkler head?

There are many options available from multiple manufacturers listed for your desired use in ordinary hazard. Depending on storage arrangements + heights, commodity classification of combusitbles (groupI, II,III etc). Standard-spray sprinkler coverage is around 130sq.ft. Extended can be up to 400sq.ft. depending on water pressure and flow characteristics available. 16x16, 18x18, and 20x20 are the most common spray pattern coverage area's of extended coverage sprinklers. That is just scratching the surface, many factors come into play when selecting the appropriate sprinkler head for any given application. Cheers~


Is a parking garage a light hazard occupancy?

Automobile parking garage Ordinary Hazard Group 1


3 WHAT is the Minimum Density for Automatic-Sprinkler Piping Design in light hazard occupancy?

0.10 gpm over 3000 square foot area.


Sprinkler coverage area for extra hazard heads?

Extra hazard occupancies require densities of either 0.30 gpm/sq ft or 0.40 gpm/sq ft, for which the maximum head layout is 100 sq ft per NFPA 13. There are some sprinkler heads in the market that allow coverages up to 196 sq ft with a special listing. Tyco EC-25 and EC-17, and Reliable MBEC-14 are some of the heads that can be used with certain restrictions.


What is the maximum square footage of an ordinary 1 hazard?

In golf, there is no limit. Some hazards are naturally occurring so it would be pointless to have a limit on their size.


Is church considered nfpa light hazard?

Probably not. NFPA 1 "Hazard of Contents" are defined as High (with 5 levels), Ordinary or Low. The only occupancies that have "low" rating are those primarily for storage of non-combustibles. A church is primarily an assembly occupancy and could not be rated as "low hazard", based upon the risks to numerous human occupants. Types of occupancies other than "storage", even if incidentally storing non-combustibles, would qualify as an "ordinary" hazard, under the theory that some combustible materials will be introduced or hazardous operations conducted, or some psychological factor introduced in case of any fire or other emergency, thus requiring at least "ordinary" fire prevention and means of egress.


Is it acceptable to taste a chemical in a laboratory if it is not hazardous?

In a laboratory (that is not a food laboratory designed for tasting) is it never acceptable to taste a chemical because you cannot know for certain that it is not hazardous. You can be misinformed about a hazard, the container can be mislabeled, or the material can be contaminated with a hazardous materials, for example.


Are puddles of water on the ice at an indoor ice skating rink a danger or is this acceptable?

Water on the ice at an indoor ice skating rink would not be acceptable, and should be reported to the management immediately as a safety hazard. And do not skate on that rink until the problem is fixed.


What is the difference between a critical point and control point?

A Control Point or "CP" is any step in the flow of food where a physical, chemical or biological hazard can be controlled. Where as A Critical Control Point or "CCP" is the last step where you can intervene to prevent, eliminate or reduce a hazard to an acceptable limit.


Signs and symbols inside the laboratory?

animal hazard=sharp instrument hazard==heat hazard==glasses hazard==chemical hazard==electrical hazard==eye and face hazard==fire hazard==biohazard==laser radiation hazard==radioactive hazard==explosive hazard=