The prefix, 'milli', literally means 1/1000. Just like a millimeter is 1/1000th of a meter. So replace milli with 1/1000 and you have the answer in volts.
For example, 583 millivolts = 583 x 1/1000 volts =583/1000 volts = 0.583 volts.
To convert watts to amps a voltage value must be given. Amps = Watts/Volts. Amps = .011/Volts.
To convert from kilovolts to volts you must multiply the kilo volts by 1,000 much like you have to multiply metres by 1,000 if tryng to find kilometres. So 50kV x 1,000 = 50,000V
You can't convert volts to amperes. Those are quite different units; that would be like converting, say, meters to seconds.
you must steps trought the must of hoenn you must steps trought the must of hoenn you must steps trought the must of hoenn
110 V gives 240 T and 1200 V gives X? so X=(1200V*240T)/110 V=2619 Turns
Changing the voltage is done by using a transformer. These voltages are dangerous and the job should be done by an electrician who knows the safety regulations that must be followed in your country.
The TV might have a panel on the back where you can adjust the voltage that it works on. If not, you need a step-down transformer to convert 240 v to 120 v for the television, and it must be rated at the amount of power the TV takes, which could be 100-200 watts.
A: It must be be understood that current needs voltage other wise it is zero. An ammeter for DC is always a voltmeter that reads small IR drop to convert that reading into current present. Like an ohmmeter needs volts to read ohm. Both reading are volts it just convert those reading into whatever scale is switch to.
No. The machine must be used on the nameplate rated voltage.
No. Quick assets must be one step or less to convert to cash. Quick assets are cash (doesn't need to be converted), A/R and temporary investments (cash just needs to be collected). Inventory is considered a current asset, but not a quick asset, because it requires two steps to convert to cash. It must be sold, and then the cash must be collected.
You must rephrase your question to make it more specific. <<>> The formula to use to find KVA in a three phase system is, KVA = Amps x Volts x 1.73/1000.
No, it must be charged with a battery charger plugged into 120 volts AC which converts it to 12 volts DC.