The fastest way to remove paint from a metal surface without a wholesale "stripping" of that surface is sanding. And power sanders, either the electric or pneumatic sanders, will do the job nicely. It will be up to the user to keep the surface of the abrasive pad flat against the surface to avoid "digging through" it. And a light touch with the correct pad will get the paint off quickly without ripping through to the metal underneath. A 220 grit pad is not too rough that you can't control it, and not too fine that it takes all day to do the job. The thinking here is for automotive applications. If you have a different problem, you'll have to adapt what is here, or perhaps ask a different question. Noise and dust might be a problem, either for you or for "neighbors" who might be affected by your activities. Think through the setup to find the right place and time to do the work.
Factory finish would have been an enamel paint. Even if it has been repainted, it is most likely enamel also. If the paint is old you can probably paint it with anything without it raising the old finish. If in doubt, you can spray a sealer on first and then the paint.
What metal is used in paint?
Black metal bands usually do such as Dark Throne, Mayhem and Gorgoroth and Black/Death metal band Behemoth wear face paint as well even after their genre change to death metal. Some folk metal bands wear face paint (or war paint) as well in the case of Turisas. Cyber metal band The Kovenant also wear face paint. It all really depends on what sort of look or ideality the band is going for.
Why would you paint a base metal chain? Why not get it electroplated in white or yellow gold. You probably need to paint it before the links were put together. Good question.
Acrylic Enamel is the easiest. You don't have to put clear on it. Just prime it, sand it, paint it.
What kind of dried paint? What is under the paint on the ceiling? ....on the metal?
melanie
Depending on how much paint is on the painted metal part you should be able to rub the polyurethane off the painted metal with compound and a buffer. It might be better to start by hand rubbing it first rather than firing up a machine that can cut through the paint you are trying to save.
it covers the metal which the paint is covered .
If it has a matte finish it should be easy to paint over.
Yes it can. In most instances, the acrylic will actually protect metals without damaging the base metal as it is plastic to begin with. However do not expect it to be permanent. In order for the artwork to be permanent, it needs to be in baked enamel.
If you are going to do without a primer, Tremclad anti-rust paint is best on exterior metals.