Zirconium melting point is 1855 deg C (fuel cladding). Uranium dioxide melts at 2800 deg C. Thus the fuel cladding could only melt in dry conditions, normally it is submerged in water at much lower temperature. Consideration of fuel pin center temperature during power operation has to be a design factor, as UO2 is not a good conductor of heat.
Well, as nuclear reactors are nuclear reactors, nuclear reactors are not used inside nuclear reactors.
There are 59 nuclear reactors in France.
This is different in different reactor designs:boiling water reactors operate at the boiling temperature of water (100C)pressurized water reactors operate at over 300Cseveral types of very high temperature gas cooled reactors can operate at temperatures up to 1000C
Current nuclear reactors rely on nuclear fission as their nuclear reaction.
As of 2010, India has 20 Nuclear Reactors.
the cause of the melt down of the reactors in japan is the water that is needed to cool down the reactors
Well, as nuclear reactors are nuclear reactors, nuclear reactors are not used inside nuclear reactors.
Temperature sensors are installed in nuclear reactors as part of the design. An array of thermocouple-based sensors is not uncommon.
Nuclear reactors use nuclear fission.
There are 59 nuclear reactors in France.
This is different in different reactor designs:boiling water reactors operate at the boiling temperature of water (100C)pressurized water reactors operate at over 300Cseveral types of very high temperature gas cooled reactors can operate at temperatures up to 1000C
Yes In high temperature gas cooled nuclear fission reactors using the nuclear process heat.
We use nuclear fission in nuclear reactors to tap nuclear energy.
Current nuclear reactors rely on nuclear fission as their nuclear reaction.
There are over 400 nuclear reactors around the world.
there are no bad things about the nuclear power reactors
As of 2010, India has 20 Nuclear Reactors.