it doesn't depend on the temperature but depends on how much water was evaporated
Dew Point specific humidity
dew point
Dissolving power refers to the ability of a solvent to dissolve a certain amount of a solute.Once no more solute can be dissolved in a solvent it is said to be reached to its saturation point. By changing temperature and pressure of a solution that has reached its saturation point, some more solute can be dissolved and thereby make a supersaturated solution.
Temperature affects the saturation point (:
Reverse saturation current of germanium diodeThe current that exists under reverse bias conditions is called the reverse saturation current. Reverse saturation current of the germanium diode is typically 1 micro ampere or 10-6 a.At a fixed temperature, the reverse saturation current of a diode increases with increase in applied reverse bias. In reverse bias region the reverse saturation current also varies with the temperature.
As you add solute to a dilute If_you_add_solute_to_a_dilute_solution_what_does_the_solution_become, the solution becomes more concentrated until the solution has reached its saturation concentration. At the saturation concentration, no more solute can dissolve into the solution.Read more: If_you_add_solute_to_a_dilute_solution_what_does_the_solution_become
it has reached a vonchardis front
Saturation
saturation
Such a solution is called is called unsaturated solution. In such a solution the salt dissolved hasn't reached the level of saturation. Also, more solute can be dissolved if temperature is increased after reaching the saturation.
Saturation temperature of steam is the Temperature at whihc any addition of heat does not increase the temperature of the water but produces steam.It depends upon the pressue and for every pressure there is a saturation temperature.
Saturation is reached when the ground can no longer absorb rain water. Flooding is usually the result.
Compressor and evaporator
Dissolving power refers to the ability of a solvent to dissolve a certain amount of a solute.Once no more solute can be dissolved in a solvent it is said to be reached to its saturation point. By changing temperature and pressure of a solution that has reached its saturation point, some more solute can be dissolved and thereby make a supersaturated solution.
Both temperatures are related to the saturation temperature in the steam drum of a heat recovery steam generator. The approach temperature is the water temperature at the economizer outlet, which in many analyses is assumed to be equal to the saturation temperature for simplicity. The "pinch point temperature difference" is the difference between the saturation temperature and the gas temperature at the economizer inlet.
DRY steam is superheated There is a temperature below which steam will start to condense into water droplets. This is called the saturation temperature, and it varies with the pressure of the steam. Steam that is exactly at its saturation temperature is called saturated steam. Steam that is below its saturation temperature contains droplets of moisture and is called wet steam. Steam that is above its saturation temperature is called superheated steam.
Temperature affects the saturation point (:
Temperature
Dew Point and Temperature 1) The air needs to be cooled to its dew point. 2) The air needs to have reached saturation, which can be achieved through many ways.