What temperature must be maintained for a salt water pool?

The temperature must be below 32 degrees Fahrenheit.

With an indoor pool (not a spa) room air temperature should be maintained 2-5 degrees above the water temperature< with 50% or less humidity.

Yes,ower body can effect the water in a pool

Sunlight warms pool water

A standard bubble pool cover and increase your pool water temperature by up to 10 degrees Fahrenheit.

It depends on the surface size, temperature of the water and outside air temperature, the activity in the water, if there are any water features in the pool etc.

The water level needs to be maintained at the middle of the skimmer opening or center of the tile line.

It is not the salt water pool or the salt water that is turning your hair green. It is a poorly maintained pool with a chemical imbalance - pH and total alkalinity out of required parameters.

A thermometer is used to measure the water temperature, typically a specially designed pool thermometer.

The health risks of a poorly maintained pool can be fatal. You can catch many infections.

no, the pool must be empty

The temperature in the water in the swimming pool is warmer than the surrounding air thus, you will feel colder when you get out of the pool. However if the temperature was the same the effect of the condensation of water on your skin would also have a cooling effect.

You use a water heater, which may be electric or gas, to circulate the pool water through and maintain temperature.

The proper pH level is 7.2-7.5

Pool PH should always be maintained between 7.2 & 7.6. Most other pool chemicals including algaecides, clarifiers, and chlorine work most effectively with PH maintained in that range.

Water temperature shall be min. 26oC (79oF).

No way to tell, as it depends on several conditions: volume of pool shape of pool starting temperature of water starting temperature of surrounding soil wind sun ambient temperature

Answer Yes, a waterfall will certainly aerate the pool water which will cause a slight increase in water evaporation which will, in turn, slightly decrease the water temperature. However, this effect will be minor to say the least. Your pool water temperature will still be governed primarily by the amount of sunlight your pool receives, the surrounding air temperature, and the ground temperature. Water cooling due to wind and water evaporation are typically seconded contributors…

That is a question loaded with variables. How many gallons in the pool? What is the temperature outside? What is the temperature of the water? Is there a solar blanket on the pool? How about bather load? (# of swimmers per hour)

You don't! Water must be emptied, liner reset in place and pool refilled

Most pool pumps MUST have water flow to avoid overheating.

Yes, it is possible to get a bacterial infection from a swimming pool. That's why balancing and sanitizing pool water is so important. Bacteria are introduced into swimming pools by people, wind and rain, reptiles and animals, and all kind of bacteria-carrying debris that enters the pool through a variety of other means. Pools must be sanitized to get rid of these contaminants and make them a healthy place to swim. Pool water must be…

Possibly. In some hot pools amoeba are a problem. They get washed into the pool with rain water. If your swimming pool is well maintained - chlorinated correctly - maybe amoeba won't be a problem.

This depends on the temperature in your area.

Yes, the surface color of a pool will affect the water temperature to a small degree. More important to water temperature is your geographic location, the season, existing water temperature, minimum and maximum daily air temperature, number of hours of sun the pool gets each day, cloud cover, wind speed, and the number of hours and times of day that you use a pool cover. Hope this helps ...